pastebin - collaborative debugging

pastebin is a collaborative debugging tool allowing you to share and modify code snippets while chatting on IRC, IM or a message board.

This site is developed to XHTML and CSS2 W3C standards. If you see this paragraph, your browser does not support those standards and you need to upgrade. Visit WaSP for a variety of options.

pastebin private pastebin - collaborative debugging tool What's a private pastebin?

Posted by Willow on Sun 21st Dec 21:57
download | new post

  1. smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-win7(64)] (sf-6.3-1)
  2. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Western Digital Caviar Blue (SATA 6Gb/s)
  6. Device Model:     WDC WD10EZEX-00RKKA0
  7. Serial Number:    WD-WCC1S5978557
  8. LU WWN Device Id: 5 0014ee 25e6264d6
  9. Firmware Version: 80.00A80
  10. User Capacity:    1,000,204,886,016 bytes [1.00 TB]
  11. Sector Sizes:     512 bytes logical, 4096 bytes physical
  12. Device is:        In smartctl database [for details use: -P show]
  13. ATA Version is:   ATA8-ACS (minor revision not indicated)
  14. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  15. Local Time is:    Sun Dec 21 21:56:48 2014 GMTST
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18. AAM feature is:   Unavailable
  19. APM feature is:   Unavailable
  20. Rd look-ahead is: Enabled
  21. Write cache is:   Enabled
  22. ATA Security is:  Disabled, frozen [SEC2]
  23. Wt Cache Reorder: Enabled
  24.  
  25. === START OF READ SMART DATA SECTION ===
  26. SMART overall-health self-assessment test result: PASSED
  27.  
  28. General SMART Values:
  29. Offline data collection status:  (0x84) Offline data collection activity
  30.                                         was suspended by an interrupting command from host.
  31.                                         Auto Offline Data Collection: Enabled.
  32. Self-test execution status:      (   0) The previous self-test routine completed
  33.                                         without error or no self-test has ever
  34.                                         been run.
  35. Total time to complete Offline
  36. data collection:               (10440) seconds.
  37. Offline data collection
  38. capabilities:        (0x7b) SMART execute Offline immediate.
  39.                                         Auto Offline data collection on/off support.
  40.                                         Suspend Offline collection upon new
  41.                                         command.
  42.                                         Offline surface scan supported.
  43.                                         Self-test supported.
  44.                                         Conveyance Self-test supported.
  45.                                         Selective Self-test supported.
  46. SMART capabilities:            (0x0003) Saves SMART data before entering
  47.                                         power-saving mode.
  48.                                         Supports SMART auto save timer.
  49. Error logging capability:        (0x01) Error logging supported.
  50.                                         General Purpose Logging supported.
  51. Short self-test routine
  52. recommended polling time:        (   2) minutes.
  53. Extended self-test routine
  54. recommended polling time:        ( 120) minutes.
  55. Conveyance self-test routine
  56. recommended polling time:        (   5) minutes.
  57. SCT capabilities:              (0x30b5)       SCT Status supported.
  58.                                         SCT Feature Control supported.
  59.                                         SCT Data Table supported.
  60.  
  61. SMART Attributes Data Structure revision number: 16
  62. Vendor Specific SMART Attributes with Thresholds:
  63. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  64.   1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  65.   3 Spin_Up_Time            0x0027   174   172   021    Pre-fail  Always       -       2275
  66.   4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       98
  67.   5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  68.   7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  69.   9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       1057
  70.  10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
  71.  11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
  72.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       98
  73. 192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       11
  74. 193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       86
  75. 194 Temperature_Celsius     0x0022   104   095   000    Old_age   Always       -       39
  76. 196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
  77. 197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
  78. 198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
  79. 199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
  80. 200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
  81.  
  82. SMART Error Log Version: 1
  83. No Errors Logged
  84.  
  85. SMART Self-test log structure revision number 1
  86. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  87.  
  88. SMART Selective self-test log data structure revision number 1
  89.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  90.     1        0        0  Not_testing
  91.     2        0        0  Not_testing
  92.     3        0        0  Not_testing
  93.     4        0        0  Not_testing
  94.     5        0        0  Not_testing
  95. Selective self-test flags (0x0):
  96.   After scanning selected spans, do NOT read-scan remainder of disk.
  97. If Selective self-test is pending on power-up, resume after 0 minute delay.

Submit a correction or amendment below. (click here to make a fresh posting)
After submitting an amendment, you'll be able to view the differences between the old and new posts easily.

Use syntax highlighting

To highlight particular lines, prefix each line with @@


Remember my settings