pastebin - collaborative debugging

pastebin is a collaborative debugging tool allowing you to share and modify code snippets while chatting on IRC, IM or a message board.

This site is developed to XHTML and CSS2 W3C standards. If you see this paragraph, your browser does not support those standards and you need to upgrade. Visit WaSP for a variety of options.

pastebin private pastebin - collaborative debugging tool What's a private pastebin?

Posted by frymaster on Sat 17th Dec 10:16
download | new post

  1. IPMI Firmware Release Note
  2. ----------------------------
  3. Filename:       SMT_SX_260.bin ver2.60 Date: 11-03-2011
  4. 1. Bug fix for "Chassis Intrusion Reset" button not showing up when there is event triggered
  5.  
  6. ======================================================================================
  7.  
  8. Filename:       SMT_SX_259.bin ver2.59 Date: 10-27-2011
  9. 1. Bug fix Administrator's username visible to Operator privilege at IPMI Web
  10.  
  11. ======================================================================================
  12. Filename:       SMT_SX_258.bin ver2.58 Date: 10-11-2011
  13. 1. Bug fix undefined "SMTP SSL Auth" from Web
  14.  
  15. 2. Bug fix KVM poor quality issue
  16.  
  17. ======================================================================================
  18. Filename:       SMT_SX_257.bin ver2.57 Date: 09-19-2011
  19.  
  20. 1. Allowed Operator full access to KVM, Mouse Mode, and Virtual Media
  21. Validation: Operator should be able to change mouse mode, virtual media setting, and access KVM as well
  22.  
  23. ======================================================================================
  24.  
  25. Filename:       SMT_SX_256.bin ver2.56 Date: 08-23-2011
  26.  
  27. 1. Bug fix for discrete sensors reporting to applications (IssueID: 31173)
  28.    Validation: 1) turn the system off, 2) check if any false alarm of chassis intrusion or power fail
  29.  
  30. ======================================================================================
  31. Filename:       SMT_SX_255.bin ver2.55 Date: 07-14-2011
  32.  
  33. 1. Bug fix Event Log description undefined from web GUI(IssusID: 30352, 30327 and 30295)
  34.    Validation: Server Health-> Event Log
  35.  
  36. 2. Bug fix Gateway IP lost
  37.    Validation: change network setting from static to dhcp by using ipmitool or IPMICFG
  38.  
  39. 3. Add iKVM privilege verification
  40.    Validation: virtual media can't be accessed by Operator account
  41.  
  42. ======================================================================================
  43. Filename:       SMT_SX_254.bin ver2.54 Date: 06-22-2011
  44.  
  45. 1. Bug fix Event Log description undefined from web GUI
  46.    Validation: Server Health-> Event Log
  47.  
  48. 2. Bug fix sensor status icon missing at webpage header
  49.    Validation: summarized sensor status icon located at up-right corner of webpage
  50.  
  51. 3. Bug fix unable to delete newly added Users (IssueID=29907)
  52. 4. Bug fix Alert Email description of CPU Overheat event (IssueID=29583)
  53. 5. Bug fix SMASH login without password
  54.  
  55. ======================================================================================
  56. Filename:       SMT_SX_253.bin ver2.53 Date: 06-02-2011
  57.  
  58. 1. Support Circular Buffer evnet logs
  59.    Description: Event logged as FIFO mechanism when number of logs exceeds the maximum fixed-size, 512
  60.  
  61. 2. Support IP Control
  62.    Validation: Verify IP Control feature at IPMI Web-> Configuration-> IP Control
  63.  
  64. ======================================================================================
  65. Filename:       SMT_SX_252.bin ver2.52 Date: 05-26-2011
  66.  
  67. 1. Add "All Event" category as default selection at Event Log page
  68.  
  69. 2. Renew SSL Certificate
  70. Validation:     1) enter Web GUI->Configuration->SSL Certificate, and 2) verify the certificate's validity
  71. *** Note:       Factory Default REQUIRED
  72.  
  73. ======================================================================================
  74. Filename: SMT_SX_251.bin ver2.51 Date: 05-12-2011
  75.  
  76. 1. New feature: launch SOL over SMASH
  77.         Validation: 1) login IPMI SMASH through SSH, 2) follow the command flow: cd system1 -> cd sol1 -> start
  78.         Note: only one SOL session can be launched at a time.
  79.  
  80. 2. Improve security for IPMI Configuration backup
  81.         Validation: Verify the following steps:
  82.                 1) open IPMI web
  83.                 2) click on Maintenance -> IPMI Configuration
  84.                 3) save IPMI configuration at local drive, and
  85.                 4) check if the configuration can "NOT" be located at http://ipmi-ip-address/save_config.bin
  86.  
  87. 3. Fixed CPU Temp Overheat event logged while CPU Not installed
  88.  
  89. 4. [X7SPT] Removed Chassis Intrusion from SDR list
  90.         Validation: issue command "ipmitool sdr list" and check if Chssis Intrusion is removed
  91.  
  92. ======================================================================================
  93. Filename: SMT_SX_250.bin ver2.50 Date: 04-08-2011
  94.  
  95. 1. [X8SIL, X8SIE, X8SI6, X8SIT, X8SIU, X7SPA, X7SPE, X7SPT] Change memory configuration for Hynix 800 memory
  96. Note: AC cycle required after firmware update
  97.  
  98. ======================================================================================
  99.  
  100. Filename: SMT_227.bin ver2.27 Date: 03-29-2011
  101.  
  102. 1. [X8SII/X8SIE/X8SI6/X8SIT/X7SPA/X7SPE] Remove Thermal Trip event log to prevent false alarm
  103.  
  104. 2. Modify default FRU
  105. Description:Board Manufacture modified as "Supermicro" and all other entries cleared
  106. Note:      Required OEM command raw 0x30 0x41(wait for BMC reset) to replace with the new FRU content
  107.  
  108. ======================================================================================
  109. Filename: SMT_226.bin ver2.26 Date: 03-18-2011
  110.  
  111. 1. Fix Alert table blank at the webpage when enter more than 29 characters (IssueID: 95761)
  112.    Validation:  1. Connect to IPMI by web browser,
  113.                 2. Go to Configuration -> Alerts and select one entry for modify,
  114.                 3. In the Message space, enter 30 characters and then save it and then the alert table will be blank.
  115.  
  116. 2. H8SCM: Support thermal trip event logs (IssueID=26744)
  117.  
  118. 3. H8SCM, H8DCT, H8DCL: Change CPU vcore threshold to 1.448 for CPU max vcore over 1.2V (IssueID=27374)
  119.  
  120. ======================================================================================
  121. Filename: SMT_225.bin ver2.25 Date: 03-011-2011
  122.  
  123. 1. X7SPA/X7SPE: Remove thermal trip events since gpio signal is unstable
  124. 2. Removed Air/VRD/NB Temp senors
  125.  
  126. ======================================================================================
  127. Filename: SMT_224.bin ver2.24 Date: 03-07-2011
  128.  
  129. 1. H8DCL: Added Chassis Intrusion status monitoring(IssueID=27711)
  130.    Description: View chassis intrusion status at IPMI Web-> Server Health-> Sensor Reading
  131.  
  132. 2. H8DCT: Fixed CPU Temp reading shows wrong information (IssueID=27791)
  133.    Validation: Check if the reading is changed accordingly to the real temperture   
  134.  
  135. ======================================================================================
  136. Filename: SMT_223.bin ver2.23 Date: 02-23-2011
  137.  
  138. 1. H8DGU-LN4, H8DGT, H8DGU, X8DTU, X8SIU, X8DTN+, X8DTU-6TF, X8DTL-i/6F, X8DTT, H8DCT, H8DCL:
  139.    Fix CPU Temp Overheat event log missing
  140.  
  141. 2. New feature: Port Configuratioin at Web GUI in Configuration category
  142.    Description: ports of web, web SSL, IKVM server, virtual media are modifiable through web GUI
  143.  
  144. 3. Fix Gateway setting can't work through different subnets
  145.  
  146. ======================================================================================
  147. Filename: SMT_222.bin ver2.22 Date: 02-09-2011
  148.  
  149. 1. Correct ID for new motherboard support X8SIL-SIOM
  150.  
  151. 2. Fix cpu temp "Overheat" logged when the reading reports "High"
  152.    Description: CPU temp Overheat should be logged as the reading reaches "Overheat"
  153.  
  154. 3. For security issue, set the privilege of user ID1(Anonymous) with no access and clear jnlp kvm cache
  155.    Validation:  1. open IPMI web, 2 click Configuration->Users, and 3 check the privilege of user shows Reserved;
  156.                 4. launch kvm console, and 5. check if kvm jnlp file is cached after exit
  157.  
  158. ======================================================================================
  159. Filename: SMT_221.bin ver2.21 Date: 02-01-2011
  160.  
  161. 1. Add new motherboard support X8SIL-SIOM
  162. 2. Add new motherboard support H8DCL
  163.  
  164. ======================================================================================
  165. Filename: SMT_V220.bin ver2.20 Date: 01-11-2011
  166.  
  167. 1. H8DGG: Add slot 4 M1060/M2050/M2070/M2070Q GPU support (fan speed control, shutdown and slowdown)
  168. 2. Fix KVM slight flashes of white space while screen resolustion is below 800*640
  169.  
  170. ======================================================================================
  171. Filename: SMT_V219.bin ver2.19 Date: 12-31-2010
  172.  
  173. 1. H8DCT: remove VRD1 & VRD2 sensor items.
  174. 2. Fix uninstalled fans report lower threshold events while doing system reset
  175. 3. Fix lan1 lost connection issue while doing ipmi cold reset
  176.  
  177. ======================================================================================
  178. Filename: SMT_218.bin ver2.18 Date: 12-17-2010
  179.  
  180. 1. X9SCL/X9SCM: modify Fan5 to FanA
  181. 2. X7SPT/X7SPA/X7SPE: fix wrong CPU Temp reading
  182.  
  183.  
  184. ======================================================================================
  185.  
  186. Filename: SMT_217.bin ver2.17 Date: 12-10-2010
  187.  
  188. 1. H8SCM: Removed Fan6 sensor entry
  189.  
  190. ======================================================================================
  191.  
  192. Filename: SMT_216.bin ver2.16 Date: 12-06-2010
  193.  
  194. 1. Add new motherboard X7SPT support
  195.  
  196. ======================================================================================
  197. Filename: SMT_215.bin ver2.15 Date: 11-24-2010
  198.  
  199. 1. Bug fix on Lan1 issue
  200.  
  201. ======================================================================================
  202. Filename: SMT_214.bin ver2.14 Date: 11-12-2010
  203.  
  204. 1. Fix the screen splash or blank screen when doing the cold reset
  205. Description: please do AC on/off after firmware update.
  206.  
  207. ======================================================================================
  208. Filename: SMT_213.bin ver2.13 Date: 11-10-2010
  209.  
  210. 1. Add new SSID for X9SCM
  211. 2. Fix incorrect sensor readings
  212.  
  213. ======================================================================================
  214. Filename: SMT_212.bin ver2.12 Date: 10-25-2010
  215.  
  216. 1. Add new motherboard X9SCL/X9SCM support
  217. 2. H8DCT: Bug fix Fan3 speed is monitored 
  218.  
  219. ======================================================================================
  220.  
  221. Filename: SMT_211.bin ver2.11 Date: 10-19-2010
  222.  
  223. 1. Fixed Virtual Media can't mount hidden files
  224.  
  225. Description: VM should be able to mount hidden files with a dollar sign in the share like "\share$\dvdimage.iso"
  226.  
  227. ======================================================================================
  228.  
  229.  
  230. Filename: SMT_210.bin ver2.10 Date: 10-13-2010  ***CPU clock fixed at 180MHz***
  231.  
  232. 1. CPU clock fixed at 180MHz
  233. 2. X8DGG: Added device ID for GPU models, M2070 & M2070Q
  234. Description: GPU temperature are readable for new models.
  235.  
  236.  
  237. ======================================================================================
  238.  
  239. Filename: SMT_208.bin ver2.08 Date: 09-29-2010
  240.  
  241. 1. Update on ECC error event logs
  242. 2. Add support for the BIOS to set different ACPI state (S0: system on, S1: sleep, S3: hypernate and S5: system off)
  243. 3. H8DGU(Appro): change lower thresholds of CPU Vcore & CPU DIMM VTT to fix the problem when 1.35v 8GB memory installed.
  244.         Note: CPU Vcore:  0.736(NR), 0.744(CT), 0.752(NC) and CPU DIMM VTT: 0.584(NR), 0.592(CT), 0.6(NC).
  245. 4. Correct entity IDs in SDR
  246. 5. H8DGT/H8SGL/H8SCM/H8DGU-LN4: modify upper thresholds of NB Temp to 90(NC), 100(CT) and 110(NR) degree c
  247. 6. H8DGG: Remove sensors of GPU3 & GPU4 temp
  248. 7. Add new motherboard H8DCT support
  249.  
  250. ======================================================================================
  251.  
  252. Filename: SMT_207.bin ver2.07 Date: 09-15-2010
  253.  
  254. For X8SIL/X8SIE/X8SII/X8SIA/X8SIU:
  255. 1. Adjust lower thresholds of fan speed to 215, 400 and 585(rpm)
  256. 2. Adjust upper thretholds of -12v to -10.934, -10.74 and -10.546(volts)
  257.  
  258. ======================================================================================
  259. Filename: SMT2_206.bin ver2.06 Date: 09-08-2010
  260.  
  261. Bug fixes:
  262. 1. CPU clock follows hardware strapping
  263. (to fix BMC crash by DDR using Winbond instead of Hynix chip)
  264.  
  265. ======================================================================================
  266. Filename: SMT_206.bin ver2.06 Date: 09-03-2010
  267.  
  268. Bug fixes:
  269. 1. X8SIT: Fix event log cannot catch CPU thermal trip event log
  270. (issueID=24349) and modify sensor system temperature to read
  271. from RT1: Bank 2, Reg.50
  272. 2. H8DGU-LN4+: Fix sensor CPU temperature does not show medium/high
  273. (IssueID=24950)
  274. 3. H8DGT-HF: Modify bootloader to fix memory corrupted at production (Ferrari Project)
  275.  
  276.  
  277. ======================================================================================
  278. Filename: SMT_205.bin ver2.05 Date: 08-27-2010
  279.  
  280. Bug fixes:
  281. 1. X7SPA: Modify sensor name "Vnbcore" to "Vichcore"
  282. 2. H8DG6-F: Fix CPU temperature reports 'Low' eventhough
  283. CPU is overheating (issueID=24719)
  284. 3. Fix SSH login with user/password: ADMIN/C0rbisSMAdmin
  285.  
  286.  
  287. ======================================================================================
  288. Filename: SMT_204.bin ver2.04 Date: 08-13-2010
  289.  
  290. Bug fixes:
  291. 1. X8SIL/X8SIE/X8SIA/X8SIU: Modify system temperature to read
  292. from RT1: Bank 2, Reg.50 (issueID=24254)
  293. 2. Add Daylight Saving Time in web gui: Configuration->Date & Time
  294. 3. H8DGG-QF: Support Fermi GPU M2050 which can slowdown and
  295. shutdown GPU when overheat
  296.  
  297.  
  298. ======================================================================================
  299. Filename: SMT_203_0805.bin  ver2.03  Date: 08-05-2010
  300.  
  301. Bug fixes:
  302. 1. X8DTU-6F+: Add 100ms delay for sensor polling to fix issue
  303. wrong sensor readings on SD3 client after overnight stress test (issueID=23803)
  304.  
  305.  
  306. ======================================================================================
  307. Filename: SMT_203_0803.bin  ver2.03  Date: 08-03-2010
  308.  
  309. Bug fixes:
  310. 1. H8DG6: Remove GPU from sensor readings (issueID=24521)
  311. 2. X7SPE-HF-D525: Modify +12V sensor calculation
  312.  
  313.  
  314. =====================================================================================
  315. Filename: SMT_202_0727.bin  ver2.02  Date: 07-27-2010
  316.  
  317. Bug fixes:
  318. 1. H8DGU-LN4F: set GPIO34 to high to fix BIOS hangs with
  319. post code '3E' or 'E1' (IssueID=24461)
  320. 2. Add SMTP sender's email (Web gui: Configuration -> SMTP)
  321.  
  322.  
  323. =====================================================================================
  324. Filename: SMT_201_0721.bin  ver2.01  Date: 07-21-2010
  325.  
  326. Bug fixes:
  327. 1. Fix Lan1 issue for all motherboards with Hartwell (82574) LAN chip
  328. Description: Cannot connect to BMC use onboard LAN1 after upgrade to new FW.
  329. Validation: With default setting "failover" or default for non-dedicate LAN MB,
  330. BMC connect with LAN1, SUT in OS (WS2008R2, RH5.4, or RH5.5).  Please upgrade FW
  331. from previous release version to this new version using web GUI and check whether
  332. BMC can connect again after FW flashing.
  333.  
  334.  
  335. =====================================================================================
  336. Filename: SMT_200_0720.bin  ver2.00  Date: 07-20-2010
  337.  
  338. Bug fixes:
  339. 1. X8DTU-LN4F+: Add +1.1V sensor (issueID=24334)
  340. 2. X8DTU-F: Add sensor CPU1 DIMM and CPU2 DIMM (issueID=24269)
  341. 3. X7SPA/X7SPE: Rename sensor name "1.05V" to "Vnbcore" to sync with BIOS
  342. (issueID=23092)

Submit a correction or amendment below. (click here to make a fresh posting)
After submitting an amendment, you'll be able to view the differences between the old and new posts easily.

Use syntax highlighting

To highlight particular lines, prefix each line with @@


Remember my settings